The N-210 is a general purpose, simple to use Conductivity Monitor in an IP-66 waterproof enclosure with high and low trip outputs. The 12/24 Volt unit gives clear front panel indication of the Conductivity on a 9mm LCD and trip point activity is indicated by bright LEDs.
All controls and connections are easily accessible on the front and rear of the unit.
As standard, all monitors have a non-isolated 0-2V analogue output for recording purposes. A basic 4-20mV Current output option is available on ordering of this unit. The monitor is fitted with a cell constant switch for K=0.1, 1.0 & 10 Cells, a three position range switch and LED indicators for mS/cm and mS/cm. The decimal point and LED indicators are set automatically for the appropriate range.
|
|
|
| |
|
Ranges |
K =0.1 Cell 0 to 20.00uS, 200.0uS, 2000uS |
K =1.0 Cell 0 to 200.0uS, 2000uS, 20.00mS |
K =10 Cell 0 to 2000uS, 20.00mS, 200.0mS |
|
Accuracy |
+/-0.5% of full scale |
ATC |
2% per °C @ 25°C, Range 0-50°C |
Calibration of Cell constant |
50-150% |
Analogue O/P |
Standard 0-2V
Option Isolated 4-20mA |
Relay O/P |
High and Low 5A @ 240Vac/30Vdc |
Weight |
250g, 8.8oz Approx |
Size |
H=96, W=148, D=160 mm |
|
|
 |
Full range of sensors and accessories |
|
Automatic Temperature Compensation (ATC) |
|
Water Proof to IP-66 |
|
