Conductivity / Wall Mount / Current output option
   
The N-270 is a general purpose, simple to use Conductivity Monitor in an IP-66 waterproof enclosure with high and low trip outputs. The front panel gives clear indication of the Conductivity on a large 12.5mm LCD and trip point activity is indicated by bright LEDs. All controls and connections are easily accessible inside the enclosure preventing interference by unauthorised personnel. As standard, all monitors have a non-isolated 0-2V analogue output for recording purposes. An isolated 4-20mA current output option is available on the N-270/C . The monitor is fitted with a cell constant switch for K=0.1, 1.0 & 10 Cells, a three position range switch and LED indicators for mS/cm and mS/cm. The decimal point and LED indicators are set automatically for the appropriate range.    
 

Ranges

K =0.1 Cell 0 to 20.00uS, 200.0uS, 2000uS

K =1.0 Cell 0 to 200.0uS, 2000uS, 20.00mS

K =10 Cell 0 to 2000uS, 20.00mS, 200.0mS

Accuracy

+/-0.5% of full scale

ATC

2% per °C @ 25°C, Range 0-50°C

Calibration of Cell constant

50-150%

Analogue O/P

Standard 0-2V
Option Isolated 4-20mA

Relay O/P

High and Low 5A @ 240Vac/30Vdc

Weight

1Kg, 2.2lb Approx

Size

H=175, W=185, D=86 mm

 
Full range of sensors and accessories
Automatic Temperature Compensation (ATC)
Fully isolated 4-20mA Output Option
Water Proof to IP-66
 
Click here to download the manual.
Click here to download this page.